Acoustics validation
Each check compares a RunMat result with an independent reference: a closed-form solution, a manufactured solution or a published benchmark. The tests listed under a check run on every change and in the evidence report; receipts record a public study run with its build, commit and mesh. The validation methodology explains how checks are built and how tolerances are set, and Status summarizes every family.
Modal
Rigid rectangular cavity modes
Problem. A rigid-walled cube cavity. The kernel test uses quadratic meshes with 2, 3 and 4 cells per side and a linear mesh with 2 and 4; the public-study test runs a 1 m cube through the command line.
Reference. Rectangular-cavity frequencies , including the zero-frequency uniform mode and degenerate triplets; for the 1 m cube the first axial mode is = 171.5 Hz. (L. E. Kinsler, A. R. Frey, A. B. Coppens and J. V. Sanders, Fundamentals of Acoustics, 4th ed., Wiley, 2000.)
Compared. First eight natural frequencies; residuals and mass orthogonality.
Tolerance. Quadratic: error ratio above 2.5 per refinement and below 4e-3 at 4 cells, residuals at most 1e-8, mass orthogonality below 1e-8. Linear: error ratio above 3 from 2 to 4 cells. Command line: uniform mode below 1e-3 Hz and the three axial modes within 2 % of 171.5 Hz.
Result. Passed (3 tests) in the evidence run of 2026-11-08.
Tests: linear_cube_converges_at_second_order, rigid_cube_modes_match_rectangular_cavity_including_degenerate_triplets, rigid_cube_cavity_modes_match_rectangular_room_frequencies.
Open–open duct modes
Problem. A duct with pressure-release ends; Tet10.
Reference. Open–open duct frequencies , with no rigid mode and zero pressure on the released ends.
Compared. First five natural frequencies; modal pressure on the released nodes.
Tolerance. Relative 4e-3; released-node pressure exactly zero.
Result. Passed (1 test) in the evidence run of 2026-11-08.
Tests: pressure_release_ends_remove_the_rigid_mode_and_match_open_open_duct.
Harmonic
Sound power through a matched duct end
Problem. A plane wave travels down a duct to an anechoic (matched) end.
Reference. Plane-wave power .
Compared. Power through the matched end; accounted input power.
Tolerance. Relative 1e-3 (0.1 %).
Result. Passed (1 test) in the evidence run of 2026-11-08.
Tests: sound_power_through_the_matched_end_is_the_plane_wave_intensity_times_area.
Transmission loss of a plane layer
Problem. A plane layer between an incident port and an anechoic port, at several frequencies, on two meshes.
Reference. Closed-form plane-wave transmission loss of the layer at each frequency.
Compared. Transmission loss.
Tolerance. Below 0.05 dB on the finer mesh at every frequency, and no larger than on the coarse mesh.
Result. Passed (1 test) in the evidence run of 2026-11-08.
Tests: transmission_loss_of_a_layer_matches_the_plane_wave_reference.
Plane wave across a two-fluid interface
Problem. A plane wave crosses the interface between two fluids in an aligned slab. The public example runs the same interface with impedance ratio m = 4 at 500, 1000 and 2000 Hz.
Reference. Plane-wave reflection and transmission at the interface; for m = 4 the transmission loss is 1.938 dB.
Compared. Pressure, mean velocity and transmitted power; transmission loss of the public example.
Tolerance. Kernel: power residual below 1e-8; finest-mesh pressure error below 0.004 of the incident amplitude and velocity error below 0.01. Public example: within 0.1 dB of 1.938 dB.
Result. Failed in the evidence run of 2026-11-08: two_fluid_interface_example_publishes_the_plane_wave_transmission_loss.
Tests: two_fluid_interface_pressure_mean_velocity_and_power_refine, two_fluid_interface_example_publishes_the_plane_wave_transmission_loss.
Lossy duct standing wave
Problem. A duct with loss factor 2ζ driven at one end.
Reference. The complex-wavenumber standing wave and the power it dissipates.
Compared. Nodal complex pressure; dissipated against input power.
Tolerance. Pressure error ratio above 3 per refinement and below 0.004 on the finest mesh; power error below 1e-9.
Result. Passed (1 test) in the evidence run of 2026-11-08.
Tests: damped_duct_converges_to_the_complex_wavenumber_standing_wave_and_dissipates_its_input.
Duct with a complex impedance termination
Problem. A duct terminated by a tabulated complex impedance; Tet4.
Reference. The two-wave duct solution for the termination's reflection coefficient.
Compared. Nodal complex pressure; dissipated against input power.
Tolerance. Pressure error ratio above 3 per refinement and below 0.004 on the finest mesh; power error below 1e-9.
Result. Passed (1 test) in the evidence run of 2026-11-08.
Tests: complex_impedance_termination_converges_to_the_two_wave_duct_solution.
Plane traveling wave
Problem. A Tet10 slab carrying a plane traveling wave at two frequencies, three refinements.
Reference. The exact traveling wave: pressure phase, particle velocity, intensity and energy.
Compared. Pressure, velocity, intensity and energy; power balance.
Tolerance. Pressure error below 0.004; velocity RMS error below 0.01; intensity and energy RMS errors below 0.005; residual below 1e-10 and power error below 1e-8.
Result. Passed (1 test) in the evidence run of 2026-11-08.
Tests: tet10_traveling_wave_phase_pressure_velocity_and_power_converge.
Forced axial cavity near resonance
Problem. A rigid cavity forced axially at 0.9 and 1.1 times its first resonance, on Tet4 and Tet10 meshes.
Reference. The closed-form forced standing wave and its acoustic energy.
Compared. Pressure phase and amplitude; acoustic energy.
Tolerance. Finest-mesh pressure error below 0.10; energy RMS error below 0.15; power error below 1e-8.
Result. Passed (1 test) in the evidence run of 2026-11-08.
Tests: tet4_and_tet10_forced_rigid_cavity_converge_on_both_sides_of_axial_resonance.
Incident wave on an impedance boundary
Problem. A planar incident wave meets an impedance boundary with reflection coefficient 7/13.
Reference. Plane-wave reflection: net power , with the reflected pressure and velocity.
Compared. Pressure, velocity and net power.
Tolerance. Pressure error below 0.004 of the incident amplitude; velocity below 0.01; intensity terms below 0.005; power error below 1e-8.
Result. Passed (1 test) in the evidence run of 2026-11-08.
Tests: incoming_pressure_reflection_transmission_and_net_power_refine.
Plane wave across periodic boundaries
Problem. An anchored slab carries a plane wave across declared pairs of periodic planes.
Reference. The exact plane wave with Bloch phase across each periodic pair.
Compared. Pressure, mean velocity and signed intensity.
Tolerance. Pressure error below 0.004; velocity below 0.01; intensity below 0.005.
Result. Passed (1 test) in the evidence run of 2026-11-08.
Tests: anchored_bloch_plane_wave_pressure_mean_velocity_and_signed_intensity_refine.
Plane-wave radiation boundary
Problem. A slab closed by a local plane-wave radiation boundary.
Reference. Plane-wave impedance : inlet and outlet power with the exact phase.
Compared. Pressure phase, mean velocity and signed power at inlet and outlet.
Tolerance. Power within 0.005; velocity error below 0.01; residual below 1e-10 and power error below 1e-8.
Result. Passed (1 test) in the evidence run of 2026-11-08.
Tests: local_radiation_pressure_phase_mean_velocity_and_signed_power_refine.
Volume-velocity source
Problem. Slabs of several cross-sectional areas driven by a total volume flow.
Reference. The plane wave set by the volume velocity, with pressure scaling as 1/A.
Compared. Pressure, velocity and power against area and phase.
Tolerance. Pressure error below 0.004·√1.16/A; velocity below 0.01/A; power error below 1e-8.
Result. Passed (1 test) in the evidence run of 2026-11-08.
Tests: total_volume_flow_area_phase_rotation_and_power_refine_against_continuum.