Conjugate heat transfer
Conjugate heat transfer (CHT) solves the flow and temperature of a coolant together with conduction in the part it cools. Fluid and solid keep their own materials and equations; a declared interface carries temperature and heat flux across the wetted surface, so the film coefficient comes from the flow instead of a guess.
runmat run executes steady conjugate heat transfer from a .fea study. The flow is the canonical
cell-centred finite-volume solution of the fluid flow analysis on the fluid regions.
One nodal energy equation then spans every fluid and solid element: Galerkin conduction in both,
conservative advection by the solved flow in the fluid, and streamline-upwind stabilization where
the flow dominates conduction. Fluid and solid are coupled inside that single linear system, so
the interface balance holds to the solver tolerance at every node.
What equations define conjugate heat transfer?
The solid satisfies
while the fluid energy equation includes advection,
At a perfect interface,
A finite conductance (or contact resistance ) allows a jump, .
How does RunMat discretize the coupled energy equation?
- The solved finite-volume face fluxes are lifted into every fluid tetrahedron as its lowest-order Raviart–Thomas velocity. That velocity reproduces each face flux, is exactly divergence-free in a mass-conserving cell and has continuous normal flux between cells, so the summed advection rows equal the enthalpy carried through the boundary: transport neither creates nor loses energy.
- A perfect interface shares the conformal interface nodes. A conductance or resistance gives each interface node a second, fluid-side temperature joined to the solid side by , which removes from one side exactly the heat it adds to the other.
- Flow entering the fluid must carry an authored inlet temperature; outflow leaves with its own temperature; walls without a thermal law are adiabatic.
Which conjugate heat-transfer procedures are defined?
| Procedure | Contract | Execution |
|---|---|---|
conjugate_heat_transfer steady | Steady flow and steady temperature in fluid and solid | Runs from runmat run |
conjugate_heat_transfer transient | Steady flow advecting a backward-Euler temperature march from the authored initial temperature | Runs from runmat run |
conjugate_heat_transfer nonlinear | Temperature-dependent properties | Typed contract; not yet executed |
How do I declare a fluid–solid thermal interface?
model cooled_part {
assign material.aluminum to geometry.cooler.region.solid
assign material.water to geometry.cooler.region.fluid
constraint wetted { fluid.no_slip_wall { target = geometry.cooler.region.fluid_wall } }
interface wall_transfer {
conjugate_heat_transfer.conductance {
primary = geometry.cooler.region.solid_wall
secondary = geometry.cooler.region.fluid_wall
coefficient = 5000 W/m^2/K
}
}
}
study cooler {
geometry = geometry.cooler
mesh = mesh.cooler
model = model.cooled_part
analysis operating_point { conjugate_heat_transfer steady {} }
output temperature = analysis.operating_point.field.node.temperature
output velocity = analysis.operating_point.field.cell.fluid_velocity
}Use conjugate_heat_transfer.perfect where the coolant wets bare metal, conductance for a
coating and resistance for a gap pad. Primary and secondary are typed, visible roles;
proximity never creates an interface automatically, and every face where a fluid meets a solid
must belong to a declared interface. The fluid side of the wetted wall still needs its flow law,
usually fluid.no_slip_wall.
What does a conjugate run publish?
field.node.temperature: the solved nodal temperature over fluid and solid. Where an interface carries a jump, the node value is the solid side; the fluid side is retained with the result.field.cell.fluid_velocity,field.cell.fluid_pressureand the face volume flux of the fluid.- Evidence for every interface: the heat entering the fluid and the solid through it (equal and opposite), its relative imbalance and, for a finite conductance, the largest temperature jump and the residual of .
- Global energy closure: applied heat, convective losses, enthalpy carried out of the fluid and heat drawn at prescribed temperatures, with their relative imbalance.
Why is my predicted cooling wrong?
Check inlet flow and temperature, fluid properties, solid conductivity, interface law, contact area, boundary-layer resolution across the passage, heat-source power, and the reported energy closure. Laminar flow only: turbulent coolant is not modelled.
See heat transfer, fluid flow, interfaces, thermal loads, and current status.